HP Envy Pro 6475 Driver
The HP Envy Pro 6475 is an all-in-one printer that comes with multifunctional features making the printer an efficient one. To be able to access the HP Envy Pro 6475 printer features, the HP Envy Pro 6475 printer driver should be downloaded on the device. Following this, the printer driver should be installed and the printer and the device will be connected.
Complete the installation of the HP Smart app on any device or smart device. This will allow the printer and the device to stay connected. The HP Smart app allows the user to print, copy, scan and share files directly from the HP Smart app.
Complete the installation of the HP Envy Pro 6475 printer driver and the final change that should be applied is the setting up of the printer to the wireless connection. There are multiple ways in which the HP Envy Pro 6475 printer can be connected to a wireless connection. Follow the instructions that have been added below.
HP Envy Pro 6475 Printer Setup
Step 1: Remove the printer from the box
- Unbox the printer from the box and place it on a safe and flat surface.
- Remove all the protective material from the printer both inside and out.
- Make sure the printer is placed near the wireless connection.
Step 2: Connect the power cord
- Connect the HP Envy Pro 6475 printer to a power supply using the power cord.
- Connect one end of the power cord to the rear of the printer.
- The other should be connected to the power supply. Turn the printer on.
Step 3: Install the ink cartridge
- Remove the packaging material from the ink cartridges carefully.
- Load the ink cartridge through the access door of the HP Envy Pro 6475 printer.
- Ensure there is a click sound that is heard while inserting the ink cartridges.
Step 4: Load paper into the input tray
- Draw out the paper feeding tray and align it accurately.
- Place high-quality sheets of paper on the paper feeding tray.
- Ensure the sheets of paper are aligned accurately.
HP Envy Pro 6475 Driver Installation
The HP Envy Pro 6475 driver should be installed on the device to allow the printer and the device to remain connected. Complete the all-in-one printer download and installation using the steps mentioned below.
HP Envy Pro 6475 Driver for Windows
- Power up the Windows device and the HP Envy Pro 6475 printer.
- Move over to the device and enter the details of the HP Support website.
- Enter the details of the printer – HP Envy Pro 6475 and choose the OS.
- The details of the OSs should be chosen from the drop-down menu.
- Choose Windows OS and select the all-in-one HP Envy Pro 6475 printer driver.
- Complete the installation of the HP Envy Pro 6475 driver by following the on-screen instructions.
HP Envy Pro 6475 for Mac
- Power up the Mac device and the wireless HP Envy Pro 6475 printer.
- Open the HP Envy Pro 6475 website and enter the details of the printer.
- Complete the installation of the HP Envy Pro 6475 printer by choosing the OS.
- Select Mac OS from the drop-down menu and a list of drivers will appear.
- Choose the all-in-one HP Envy Pro 6475 printer driver from the list.
- Complete downloading the printer driver and initiate the installation of the HP Envy Pro 6475 driver.
Get in touch with our technical team when you face any issue with your new 123.hp.com/setup and installation. Contact us for assistance with downloading and installing printer drivers in a matter of minutes.
HP Envy Pro 6475 wireless setup
The HP Envy Pro 6475 printer should be connected to the wireless connection to allow the printer and the device to remain connected. Follow the simple steps below to complete the HP Envy Pro 6475 wireless setup.
HP Envy Pro 6475 Wifi Network Setup
- Ensure there is an active wireless connection that is stable.
- Make sure the printer’s drivers and the device software are updated.
- Power up the HP Envy Pro 6475 printer and allow it to remain idle.
- Ensure the printer and the wireless network router is placed close to each other.
- The printer can be connected to the wireless connection during installation.
- Choose the wireless connection when the installation wizard prompts the connection.
- Following this, choose the desired connection and enter the credentials.
- Within a few seconds, the HP Envy Pro 6475 wifi network setup is complete.
- If the printer wont connect to wifi network, follow the HP Envy Pro 6475 Troubleshooting steps
HP Envy Pro 6475 WPS Pin setup
- The wireless connection should be active and functioning.
- The printer should be placed near the wireless network’s router.
- Use the WPS push button method to connect the printer.
- Press and hold the WPS button on the wireless router.
- Do the same on the device by pressing down the WPS button on the printer.
- Make sure the printer and the router WPS button are pressed down at the same time.
- The connection between the printer and the wireless connection will be completed within a few minutes.
HP Envy Pro 6475 Wireless Setup Wizard
- This process can be followed for printers that come with a control panel or a touch display.
- Ensure the wireless connection is active. Make a note of the wireless connections credentials.
- Move over to the printer and select the wireless icon on the printer’s display.
- Choose the wireless setup wizard and proceed further.
- Enter the details of the wireless connection after choosing the desired connection.
- Click Ok and the connection will be established in a few minutes.
HP Envy Pro 6475 USB Setup
- This process can be followed for printers that come with a control panel or a touch display.
- Ensure the wireless connection is active. Make a note of the wireless connections credentials.
- Move over to the printer and select the wireless icon on the printer’s display.
- Choose the wireless setup wizard and proceed further.
- Enter the details of the wireless connection after choosing the desired connection.
- Click Ok and the connection will be established in a few minutes.