HP Envy Inspire 7255e wifi setup without using HP Smart app

While setting up the wireless printer, you receive an alert “to connect for Hp Smart.” We providing the steps here to setup your hp envy 7255e printer without hp smart app.

Follow the instructions to complete the process of the HP Envy Inspire 7255e wifi setup without using HP Smart App.

  1. The HP Envy Inspire 7255e printer can be connected to the wireless connection in multiple ways.
  2. When connecting the printer to a wireless connection, ensure there is an active wireless connection.
  3. Use the wireless setup wizard method to connect the printer to the wireless connection.
  4. Alternatively, the HP Smart app can also be used to set up the wireless connection.
  5. Move over to the printer and select the wireless settings and choose wireless setup wizard.
  6. Enter the details of the wireless connection after selecting the name of the printer from the list.
  7. Enter the wireless credentials and the connection of the HP Envy Inspire 7255e printer to the wifi is complete.
  8. Note there during the process of setting up without using the HP Smart app, there is no payment required.

 

HP Envy Inspire 7255e Carriage Jam

Follow these instructions if there is no paper jam but the alert indicates a carriage jam and instructs the paper to be removed.

  1. Move over to the HP Envy Inspire 7255e and complete a check to ensure there is no paper jam.
  2. Open the access door and the paper feeding tray to ensure there is no paper jammed.
  3. Check for bits of paper that could be left in the printer during the previous paper jam.
  4. Following this, if there seem to be further issues, restart the 123 HP Envy Inspire 7255e.
  5. While the printer is powered up, remove the power cord from the rear end of the HP Envy Inspire 7255e printer.
  6. Remove the power cord from the printer’s end and then the power supply.
  7. Allow the HP Envy Inspire 7255e printer to remain idle for a few minutes and power it up.
  8. Replace the existing sheets of paper with higher quality paper and continue to print using the HP Envy Inspire 7255e.

Set up “Scan to Computer” on HP Envy Inspire 7255e printer

Follow the instructions to set up the HP Envy Inspire 7255e printer “scan to computer” set up.

  1. Power up the device and the printer. Open the HP Support page.
  2. Enter the details of the HP Easy Start and initiate the download and set it up.
  3. In the HP Easy Start application, select Full Software and Drivers.
  4. Choose Continue and follow the on-screen instructions. Give access and permission wherever needed.
  5. Following this choose Scan followed by Computer. A list of available devices will appear.
  6. Choose the computer that the scanned files should be saved to.
  7. Make changes with regards to the preference such as Scan as a PDF or JPEG file.
  8. Tap Send and the files will be saved on the HP Envy Inspire 7255e.

HP Envy Inspire 7255e printer is offline – Windows 10

Here are the steps that should be followed to resolve the issue of the HP Envy Inspire 7255e printer remaining offline.

  1. Power up the HP Envy Inspire 7255e printer and the Windows 10 device.
  2. Check the wireless network. The connection should be active and stable.
  3. Ensure the 123 HP Envy Inspire 7255e and the Windows 10 device are connected to the same wireless connection.
  4. Check the HP Envy Inspire 7255e printer driver. It should be updated.
  5. If it has not been updated, it has to be updated at once.
  6. Check the Windows 10 device. It has to be updated to match the compatibility of the printer driver.
  7. Check the status of the printer. It has to be set as the default printer and the printer should be functioning online.
  8. As the final step, restart the 123 HP Envy Inspire 7255e printer.

HP Envy Inspire 7255e Driver Software unavailable

Here are the guidelines to be followed to resolve the HP Envy Inspire 7255e Driver software unavailable issue.

  1. Power up the HP Envy Inspire 7255e printer and the device the printer is connected to.
  2. Check if the printer and the device are connected to the same wireless connection.
  3. Following this, check if the 123 HP Envy Inspire 7255e driver is updated.
  4. The same has to be done with the device as well. If there is an update available, complete the update immediately.
  5. If the issue continues to prevail after the change, then restart the HP Envy Inspire 7255e printer.
  6. While the printer is powered up, remove the power cord from the rear end of the printer.
  7. Then remove the power cord from the power supply and allow it to remain turned off.
  8. Turn the printer on after a few minutes. Contact us for further assistance.

The computer does not recognize the HP Envy Inspire 7255e printer.

Here are the instructions that will assist in the process of resolving the issue of the computer not recognizing the HP Envy Inspire 7255e printer.

  1. Power up the HP Envy Inspire 7255e printer and the device.
  2. Make sure there is a wireless connection the printer and the device should be connected to.
  3. Another issue that could be causing a problem with the printer is the printer driver.
  4. Complete the installation of the updated version of the printer driver.
  5. Make sure the device that the printer is also connected to is updated.
  6. Run a quick troubleshooting diagnosis to check if other issues are causing the device to not recognize the HP Envy Inspire 7255e printer.
  7. Restart the Printers’ Spooler and complete a final check.
  8. If there are further issues with the printer driver, contact us for further assistance.

HP Smart Scan is not working on the HP Envy Inspire 7255e

Complete the below guidelines to rectify the error of the HP Smart Scan is not working on the HP Envy Inspire 7255e.

  1. To rectify the issues with the HP Envy Inspire 7255e scan, download the HP printer and Scan Doctor for a Windows device.
  2. On the device that is connected to the printer, open the HP Support page and choose Diagnostics.
  3. Choose the highlight caption that indicates the HP printer and scan doctor.
  4. Download and install it on the device. Run a quick diagnostic test of the 123 HP Envy Inspire 7255e.
  5. Follow the on-screen instructions to complete the process as instructed by the HP Printer and Scan Doctor.
  6. The issues should be rectified after following all the on-screen instructions.
  7. Contact us for further assistance to resolve the issue of the HP Smart Scan.
  8. Our team of experts will provide assistance to resolve the issue.

How to scan multiple photos at one time on HP Envy inspire 7255e

Follow the instructions below to complete the process of scanning multiple photos at once on the HP Envy Inspire 7255e.

  1. Power up the HP Envy Inspire 7255e printer and place the desired files on the scanner bed.
  2. Complete the following settings as needed for the file. Choose scan to JPEG.
  3. Choose Crop to one of the photos followed by Add a page.
  4. Then select Crop to the Second Photo.
  5. Complete the process with all the files until all the images are placed on one page.
  6. Save the scanned file and click print at the end.
  7. Or, while setting the scan preference, choose the multiple files to PDF.
  8. The files will be automatically saved to the device the HP Envy Inspire 7255e is connected to.

Leave a Comment

Your email address will not be published.